Aluminum 2 1/2" NH Rocker Lug Cap Pick One Side_1 1/2 inch This hose is constructed of

This hose is constructed of an EPDM synthetic rubber tube and a double layer of 100% polyester woven jackets

3 inch NH / NST fittings measure approximately 3 5/8"

Attaches to hydrant end of hose and need not be removed when charging the line

Brass 1 1/2 inch NH/NST threaded smooth bore nozzle with satin finish is a straight stream only with no shut-off

Kochek adjustable fire hydrant wrench with double head spanner for pentagon and square heads

Aluminum 2 1/2" NH Rocker Lug Cap Pick One Side_1 1/2 inch This hose is constructed ofAluminum adapters are fabricated from seamless extruded 6061 T6 aluminum and hard coat anodized per MIL A 8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. Gasket installed.