2 1/2" Zinc Hose Mender Color_Yellow Adapters and components meet the

Adapters and components meet the requirements of NFPA 1963

Non-rising stem wedge disc gate valve 1 1/2 inch female NPT to 1 1/2 inch male NH

Designed to give maximum protection against backflow caused by back-pressure or back-siphonage from a cross-connection wherein a contaminant hazard exists (i

Cap gauge attached with aluminum piston rings

Connector Hose: A flexible connector supply hose must be installed between the hose reel inlet hub and the water supply

2 1/2" Zinc Hose Mender Color_Yellow Adapters and components meet theThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or