Watts 152AT-5-40 1 1/2 - Part of the 152A Series ZC100F-2NH Specifications Air Venting No Vent

Specifications Air Venting No Vent Body Material Cast Iron Body Pattern H-Pattern Bottom Tapping Yes Bottom Tapping Size 1/2 IN Brand Watts Buy American Act Compliant NO Contact Rating Does Not Apply To Product EAN 098268478495 Fastfill Feature No Fill Tapping Size Does Not Apply To Product Float Chamber Connection Size Does Not Apply To Product Flow Rate Does Not Apply To Product GDS Status Registered Hydronic Item Type Steam Trap Inlet Connection Size 1 IN Inlet Connection Size-Metric 25 MM Inlet Connection Type Female Threaded Inlet Thread Type NPT Lead Free Not In Scope Maximum Operating Temperature-Fahrenheit 353 Maximum Pressure-PSI 125 Maximum Steam Pressure-PSI 15 Maximum Temperature-Fahrenheit 250 Maximum Working Pressure-PSI 15 Outlet Connection Size 1 IN Outlet Connection Type Female Threaded Outlet Thread Type NPT Part Number 0037105 Pipe Plug No Pressure Steam Discharge Capacity Does Not Apply To Product Purge And Drain Diameter Does Not Apply To Product Purge And Drain Outlet Size Does Not Apply To Product Series WFT Side Tapping No Side Tapping Size Does Not Apply To Product Strainer No Strainer Material Does Not Apply To Product Switch Type Does Not Apply To Product Temperature Adjustment Range Does Not Apply To Product Temperature Range Does Not Apply To Product Top 1 Tapping Size Does Not Apply To Product Top 2 Tapping Size Does Not Apply To Product Top Tapping No Vacuum Breaker No Venting Capacity Does Not Apply To Product Specification Sheet - WFT

Z415BL-3IG

UPC - 098268349993

and end cap

Neutral Invert Base – Flat-bottom design works best for settings where slope must be minimal or precisely controlled

Watts 152AT-5-40 1 1/2 - Part of the 152A Series ZC100F-2NH Specifications Air Venting No VentThis 1 1 2 inch process steam pressure regulator is designed for autoclaves, steam tables irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with tight seating and PTFE valve disc, and adjusting spring for reduced pressure range of 5 to 40 psi (0. 34 to 2.